Showing all 21 results
The DC connector kit enables the connection of both inputs in the event of MPP currents above 35 A
and a cable cross section of more than 16 mm², for example when using a DC Box. A cross section of 6
mm² – 25 mm² can be connected using the DC connector kit. The terminal is safe to touch. The DC
connector kit is particularly suitable for use with the Fronius Symo 10.0 – 20.0 kW and Fronius Eco
inverters.
current sensor single phase
max. 1000 / 1500 / 2000 A
diameter: 80 mm
500 kVA to 1400 kVA (three phase)
current sensor single phase
max. 500 / 1000 / 1500 A
diameter: 55 mm
150 kVA to 1000 kVA (three phase)
FRONIUS CURRENT SENSORS
The right choice of current transducers for maximum accuracy suitable for the
Fronius PV-Genset solution.
• Type 1+2 Surge Protector for Photovoltaic
• Impulse currents Iimp/Itotal : 5/10kA @ 10/350µs
• Up to 880 Vdc (Uocstc)
• Common and Differential Modeprotection
• Remote Signaling (option)
• Plug-in module
• EN 50539-11 compliance
The Fronius Smart Meter TS is a bidirectional meter, which optimises self-consumption, records the load curve and controls the various
energy flows. Thanks to highly accurate measurements and rapid communication via the Modbus RTU interface, dynamic feed-in control
when feed-in limits are imposed is faster and more accurate than with the S0 meter.
Together with the Fronius Solar.web, the Smart Meter TS presents a clear overview of the power consumption. In combination with the Fronius storage solutions, the device ensures a perfect coordination of various energy flows, which optimises the
entire energy management. The Fronius Smart Meter TS is ideally suited for use with the GEN24 Plus and Tauro, as well as
all Fronius inverters with the Fronius Datamanager 2.0.
The Fronius Datamanager is the communications networking centre of Fronius inverters. When the card is connected to the
Internet through a LAN or wireless connection, the Fronius Datamanager sends PV system data directly to the Fronius
Solar.web monitoring portal. This gives you an overview of how your system is operating at all times. Both the PV system and
the Datamanager configuration are monitored by the dedicated web server built into the Fronius Datamanager. Several
integrated interfaces, including Modbus RTU SunSpec, Modbus TCP SunSpec and Fronius Solar API (JSON, for actual values),
allow Fronius inverters to be seamlessly incorporated into third-party systems and monitored in parallel with Fronius
Solar.web.
The Fronius Ohmpilot is a consumption regulator that uses excess solar power to heat water. Thanks to its continuously adjustable
regulation from 0 to 9 kW, the excess solar power can be used efficiently and fed to a heat source in the household.
The Fronius Ohmpilot is primarily used to intelligently control heating elements for providing hot water in boilers and buffer
storage tanks, but can also be used for infrared heating or towel radiators. Solar power can thus provide a family home with
average levels of water consumption with most of their hot water from April to October. The result is maximum
selfconsumption, a reduction in the household’s CO2 emissions and less wear on the building’s main heating system during
the summer months.
The Fronius Primo in power categories from 3.0 to 8.2 kW perfectly completes the new SnapINverter generation.
This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design
provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and
maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Integrating PV-plants into genset driven grids requires fast and reliable control of the entire system. The Fronius PVSystem Controller measures all power flows in the system and controls the PV-power in an optimal way. The PVSystem Controller can also be used to balance the self-consumption and limit the exchange with the main grid to a
defined value.
The Fronius Symo range of hybrid inverters are an ideal choice for your home solar system. They have intelligent Multiflow technology that enables AC and DC coupling of battery storage and loads can be supplied at the same time as charging the batteries. Austrian made quality that has built in Wifi for data communication. Light weight and snap technology allow for easy installation.
Fronius products are made in Austria, and it is common knowledge that Austrian products are often on the forefront of their respective markets. Impartial experts Dunn & Bradstreet the world’s largest service provider of business-to-business trade information, issued Fronius with a Paper of Excellence in 2020 and assigned us a risk indicator of 1. Fronius products are distributed in 60 different countries, and they have 75 years experience. Solar Ninja is proud to distribute these top level products.
The Fronius Primo in power categories from 3.0 to 8.2 kW perfectly completes the new SnapINverter generation.
This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design
provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and
maintenance easier than ever before. The communication package included as standard, with WLAN, energy management, several interfaces and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
The three-phase Fronius Eco in power categories 25.0 and 27.0 kW perfectly meets all the requirements of large-scale
installations. Thanks to its light weight and SnapINverter mounting system, this transformerless device can be installed
quickly and easily either indoors or outdoors. This inverter range is setting new standards with its IP 66 protection
class. Furthermore, thanks to its integrated double fuse holders and optional overvoltage protection, string collection
boxes are no longer necessary.
Integrating PV-plants into genset driven grids requires fast and reliable control of the entire system. The Fronius PVSystem Controller measures all power flows in the system and controls the PV-power in an optimal way. The PVSystem Controller can also be used to balance the self-consumption and limit the exchange with the main grid to a
defined value.
This Fronius Tauro inverter range are three-phase, tough and perform optimally even in the harshest conditions around the world. If you are looking for an intelligent inverter range that covers the 50kw to 100kw power category that will perform in the harshest conditions Africa has to offer then look no further. These inverters offer a flexibility in design of your system, like never before, which can save costs. These devices can perform optimally in 50 degrees Celsius.
Fronius products are made in Austria, and it is common knowledge that Austrian products are often on the forefront of their respective markets. Impartial experts Dunn & Bradstreet the world’s largest service provider of business-to-business trade information, issued Fronius with a Paper of Excellence in 2020 and assigned them a risk indicator of 1. Fronius products are distributed in 60 different countries, and they have 75 years experience. Solar Ninja is proud to distribute these top level products.
The three-phase Fronius Tauro in the 50 and 100 kW power classes promises maximum performance for decentralized systems even under the harshest conditions.
With its smart hardware design, it offers not just BOS cost optimization but unprecedented flexibility in system design. Simple installation and the fastest service on the market ensure maximum yield.
No products in the cart.
